- Description
- Additional information
- Brand
Description
D355PL Firelite Intelligent Non-Relay Duct Smoke Detector
InnovairFlex D355PL Firelite non-relay photoelectric duct smoke detector features a pivoting housing that fits both square and rectangular footprints capable of mounting to a round or rectangular duct.
The InnovairFlex duct smoke detector senses smoke in the most challenging conditions, operating in airflow speeds of 100 to 4,000 feet per minute, temperatures of -4 degrees F to 158 degrees F, and a humidity range of 0 to 95 percent (non-condensing).
Model D355PL Firelite Air Duct Smoke Detector utilizes photoelectric technology for the detection of smoke. This detection method, when combined with an efficient housing design, samples air passing through the duct and allows detection of a developing hazardous condition.
When sufficient smoke is sensed, an alarm signal is initiated at the fire control panel monitoring the detector, and appropriate action can be taken to shut off fans, blowers, change over air handling systems, etc. These actions can facilitate the management of toxic smoke and fire gases throughout the areas served by the duct system.
The D355PL Firelite incorporates a sensor cover tamper feature that provides a trouble signal at the panel immediately if the cover is removed or improperly installed. Proper installation of the sensor cover removes the trouble condition.
If programmed with the system control panel, two LEDs on each duct smoke detector light to provide the local visible indication. The D355PL provides a remote alarm output for use with auxiliary devices, such as the RA400Z/RA100Z remote LED annunciator, as well as remote test capability with the RTS451/151 or RTS451KEY/RTS151KEY Remote Test Stations.
Specifications
- Operating Temperature: –4° to 158°F (–20° to 70°C 32° to 120°F (0° to 49°C) with the module installed in the D355PL.
- Storage Temperature: –22° to 158°F (–30° to 70°C).
- Humidity: 0% to 93% Relative Humidity Non-condensing.
- Air Velocity: 100 to 4000 ft./min. (0.5 to 20.3 m/sec).
- Rectangular Footprint Dimensions: 14.38 in L×5 in W×2.5 in D (37 cm L×12.7 cm W×6.36 cm D).
- Square Footprint Dimensions: 7.75 in L×9 in W×2.5 in D (19.7 cm L×22.9 cm W×6.35 cm D).
- Weight: 1.8 pounds; 0.82 kg.
- Operating Voltage Range: 15 to 32 VDC.
- Standby Current: 300µA @ 24 VDC (one communication every 5 seconds with LED blink enabled).
- Max. Alarm Current (LED on): 6.5 mA @ 24 VDC.
Datasheet D355PL.
See all our parts for Firelite
Additional information
| Weight | 1.6 lbs |
|---|---|
| Dimensions | 5 × 5 × 5 in |
| Product Brand | Firelite |
| MPN | D355PL |
| Product Category | 1871 |














