4W-B-SYSTEM-SENSOR

4W-B SYSTEM SENSOR

$74.99

Availability: 1398 in stock - FACTORY NEW SKU: 4W-B
View cart

Description

4W-B System Sensor 4-Wire Photoelectric i3 Smoke Detector

The 4W-B System Sensor is a 4-wire, photoelectric i3 smoke detector. System Sensor i3 series smoke detectors represent a significant advancement in conventional detection. The i3 family is founded on three principles: Installation ease, intelligence, and instant inspection.

The i3 line redefines installation ease with its plug-in design. This allows an installer to pre-wire bases (included with heads). The large wire entry port and in-line terminals provide ample room for neatly routing the wiring inside the base. The base accommodates a variety of back box mounting methods as well as direct mounting with drywall anchors. To complete the installation, i3 heads plug into the base with a simple Stop-Drop N Lock action.

i3 detectors offer a number of intelligent features to simplify testing and maintenance. Drift compensation and smoothing algorithms are standard with the i3 line to minimize nuisance alarms. 2-wire i3 detectors can generate a remote LED indicated maintenance signal when connected to the 2W-MOD2 loop test/maintenance module or a panel equipped with the i3 protocol. The SENS-RDR, a wireless device, displays the sensitivity of i3 detectors in terms of percent-per-foot obscuration.

The i3 series provides wide-angle red and green LED indicators for instant inspection of the condition of the detector: normal standby, out-of-sensitivity, alarm, or freeze trouble. When connected to the 2W-MOD2 loop test/maintenance module or a panel with the i3 protocol, the EZ Walk loop test feature is available on 2-wire i3 detectors. This feature verifies the initiating loop wiring by providing LED status indication at each detector.

Features 4W-B System Sensor

  • Plug-in detector line, mounting base included.
  • The large wire entry port.
  • In-line terminals with SEMS screws.
  • Mounts to octagonal and single-gang back boxes, 4-square back boxes, or direct to ceiling.
  • Stop-drop n’ lock attached to the base.
  • Removable detector cover and chamber.
  • Built-in remote maintenance signaling.
  • Drift compensation and smoothing algorithms.
  • Simplified sensitivity measurement.
  • Wide-angle, dual-color LED indication.
  • Loop testing via the EZ Walk feature.
  • Built-in test switch.

Technical Specifications 4W-B System Sensor

  • Operating Voltage: 12/24V non-polarized, 8.5-35V
  • Maximum Ripple Voltage: 30 percent peak of the applied voltage
  • Standby Current: 4-wire 50ma max.
  • Maximum Alarm Current: 20mA at 12V, 23mA at 24V
  • Alarm Contact Rating: 0.5A at 30V AC/DC
  • Dimensions (including base): 5.3″ (127mm) diameter, 2″ (51mm) height
  • Weight: 6.3oz (178g)
  • Operating Temperature Range: 32F-100F (0C -37.8C)
  • Operating Humidity Range: 0 to 95 percent non-condensing
  • Thermal Sensor: 135F (57.2C) fixed
  • Sensitivity: 2.5 percent nominal
  • Input Terminals: 14 to 22 AWG

Datasheet 4W-B.

See all our parts for System Sensor

Additional information

Weight 0.5 lbs
Dimensions 6 × 6 × 3 in
Product Brand

System Sensor

MPN

4W-B

Product Category

1871

Brand

System Sensor