4WTR-B-SYSTEM SENSOR
4WTR-B-SYSTEM SENSOR-2
4WTR-B-SYSTEM SENSOR-3
4WTR-B-SYSTEM SENSOR-4
4WTR-B-SYSTEM SENSOR-5
4WTR-B-SYSTEM SENSOR-6
4WTR-B-SYSTEM SENSOR-7
4WTR-B-SYSTEM SENSOR-BOX

4WTR-B SYSTEM SENSOR

$64.50

Availability: 715 in stock - FACTORY NEW SKU: 4WTR-B
View cart

Description

4WTR-B System Sensor 4-wire, Photoelectric i3 Smoke Detector With a Thermal Sensor and Form C Relay.

The 4WTR-B System Sensor is a 4-wire, photoelectric i3 smoke detector with a thermal sensor and Form C relay. Throughout the i3 series, installation is simple with its installer-friendly base and plug-in design. The base accommodates a broad range of back box and direct mounting options and provides ample space for pre-wiring the device. To complete the installation, the i3 detector plugs into its base with a simple Stop-Drop N Lock action.

To reduce the likelihood of nuisance alarms, all i3 detectors are equipped with both drift compensation and smoothing algorithms. These capabilities minimize both short- and long-term causes of nuisance alarms, such as RF interference and dust accumulation.

When connected to the 2W-MOD2 loop test/ maintenance module or an i3 Ready panel, 2wire i3 detectors can generate a remote maintenance signal when in maintenance or freeze trouble condition. To measure the sensitivity of any i3 detector, the SENS-RDR displays the reading, in terms of percent-per-foot obscuration, within seconds.

i3 has red and green LEDs to simplify local status indication during power-up, standby, alarm, maintenance, and freeze trouble conditions. When in alarm, i3 sounder models generate an 85 dB temporal tone.

If connected to the RRS-MOD reversing relay/synchronization module, all i3 sounders on the loop will activate when one detector is in alarm. The RRS-MOD also synchronizes i3 sounder output to ensure a clear audible signal.

Should the application call for differentiating between a local and a general alarm, the i3 line offers an isolated thermal model, which initiates a local alarm when smoke is detected, and a general alarm when the thermal sensor is activated.

Technical Specifications 4WTR-B System Sensor

  • Alarm Contact Ratings: 0.5A @ 30 VAC/DC
  • Alarm Current: 35mA max.
  • Auxiliary Contact: Form C
  • Auxiliary Contact Ratings: 2A @ 30V AC/DC
  • Detection: Photoelectric
  • Dimensions: 2.0″ (51mm) H x 5.3″ (127mm) Dia.
  • Freeze Trouble: 41F (5C)
  • Heat Sensor: 135F (57.2C) fixed
  • Humidity Range: 0% to 95% RH, noncondensing
  • Maximum Ripple Voltage: 30% of applied voltage (peak to peak)
  • Operating Voltage: 12/24 V non-polarized nominal, 10 min. to 35 max.
  • Sensitivity: 2.5%/ft. nominal
  • Standby Current: 50 A max. avg.
  • Temperature Range: 32 to 100F (0 to 37.8C)
  • Weight: 7.1 oz. (200 g)
  • Wiring: 4-wire
  • Wiring Gauge: 14-22 AWG

Datasheet 4WTR-B.

See all our parts for System Sensor

Additional information

Weight 0.6 lbs
Dimensions 6.5 × 6.5 × 2.5 in
Product Brand

System Sensor

MPN

4WTR-B

Product Category

1871

Brand

System Sensor