- Description
- Additional information
- Brand
Description
EOLR-1 System Sensor SPST Relay, ULC Approved As An End Of-Line Relay To Supervise Power Supplies.
Model EOLR-1 System Sensor is epoxy encapsulated single pull single-throw (SPST) normally open relay that is activated by 9 to 40 VDC. This relay can be used as an end of line device in fire alarm systems, e.g., to supervise power supplies.
System Sensor’s multi-voltage conventional relays are used for high-current switching applications such as fan and damper assembly control, door control, air handling unit controls, and other types of system interfacing.
Features
- Multi-voltage operation.
- Activation LEDs.
- Easy and flexible installation.
- Reliable and robust design.
- Multipurpose field installations.
- Multi-voltage relays with terminal strip field wiring connections, mounting track, and hardware for R-10T/20T and R-14T/24T.
- Removable front cover on steel enclosure for R-10E/R-20E and R14/R-24E, which mount inside the enclosure.
- LED viewing hole on top of the steel enclosure’s cover.
- Extra pair of wires for redundant power input on PR-3.
- Terminal strip field wiring connections, mounting track, and hardware.
Mounting
For ease of installation, the EOLR-1 relay may be mounted in a variety of ways. It can be attached to equipment or inside an enclosure using the mounting screw or double-sided tape.
Wiring
NOTE: All wiring must conform to applicable local codes, ordinances, and regulations. The EOLR-1 connections are shown on the label on the side of the relay. Using the enclosed wire nuts, secure the electrical connections appropriate to the application.
Wire Definitions
- RED POWER INPUT (+).
- BLACK POWER INPUT (–).
- VIOLET RELAY – COMMON.
- VIOLET RELAY – NORMALLY OPEN.
Specifications
- Operating Voltage: 9 to 40 VDC ( 9 to 35 Vrms for unfiltered full-wave rectified supplies ).
- Operating Current: 20 mA max.
- Operating Temperature Range: –22ºF to 140ºF (–30ºC to 60ºC).
- Storage Temperature Range: –40ºF to 185ºF (–40ºC to 85ºC).
- Humidity: 10 to 93% RH non-condensing.
- Wire Length: 8″ min. (203 mm).
- Dimensions: 0.91″H x 1.65″W x 1.22″D (23 mm H x 42 mm W x 31 mm D).
Datasheet EOLR-1.
See all our parts for System Sensor
Additional information
| Weight | 0.5 lbs |
|---|---|
| Dimensions | 6 × 5 × 1 in |
| Product Brand | System Sensor |
| MPN | EOLR-1 |
| Product Category | 1871 |
















