RA100Z-SYSTEM SENSOR
RA100Z-SYSTEM SENSOR-2
RA100Z-SYSTEM SENSOR-BOX

RA100Z SYSTEM SENSOR

$22.10

Availability: 18 in stock - FACTORY NEW SKU: RA100Z
View cart

Description

RA100Z System Sensor Remote LED, Mounts To The Single Gang Box

The RA100Z System Sensor, National Fire Protection Association has published codes, standards, and recommended practices for the installation and use of the above appliance. It is recommended that the installer be familiar with these requirements, with local codes, and any special requirements of the local authority having jurisdiction.

The models RA100Z System Sensor & RA100ZA remote annunciators are polarized devices designed for both conventional and intelligent applications. They have been designed using an active current regulator so that the maximum current required from the system is 10mA when the input voltage is within the specified voltage range.

Installation RA100Z System Sensor

The remote annunciator is intended to be mounted to a single gang electrical outlet box. The wiring must be in compliance with all codes. The device must be operated within its published specifications.

Wire the remote annunciator according to the instructions supplied with the device being monitored. The polarity of the incoming wires must be observed and connected to the proper terminals “+” and “–”. The provided jumper must be installed for use with System Sensor Conventional systems. To install a jumper: slide jumper over both pins.

Specifications RA100Z System Sensor

Voltage Range

Conventional System: 3.1 to 32 VDC — (Installation of jumper required).
Intelligent System: 18 to 32 VDC — (Do not install jumper).
Maximum Alarm Current: 10 mA maximum.
Temperature Range: –10° to 60°C (14° to 140°F).
Listing: UL, FM, CE.

Datasheet RA100Z.

See all our parts for System Sensor

Additional information

Weight 0.5 lbs
Dimensions 7 × 4 × 3 in
Product Brand

System Sensor

MPN

RA100Z

Product Category

1871

Brand

System Sensor